motion sensor outdoor light with manual override

#Motion sensor outdoor light with manual override full#

Turn the rounded end of the raised stick on the knob all the way to the left to test. If it has not, it will not work properly when you set your settings. This is a must in order to fully activate the sensors. Why doesn't it turn off or light erratically?You need to reboot the microprocessor in the sensor.

#Motion sensor outdoor light with manual override full#

It takes a full day or two for the adjustments to re-calibrate to the newest setting.SE1097-WH3, BP2-02LF0-G SE1095-WH3, -BP2-LF0-G*First thing to check is if it came on twice in test mode. It will come on during this time, but may not trigger every time that you think it should. So wait 24-28 hours after the settings have been set or reset. It takes custom readings every 2-3 minutes during the Learning mode. It sees motion through temperature fluctuations. Why?įor best test results, the the fixture needs to acclimate to the outside temperature for about 1 hour before putting it into test mode.Why? The sensor is a PIR (Passive Infa Red) sensor. Problems with settings, on all night, timer, motion sensor. Please try resetting/rebooting the fixture.

Quality assurance guaranteed with a 10-year limited manufacture warranty.

Universal mounting platform allows for maximum flexibility in installation and is designed to meet requirements for wall, eave, or surface box mounting includes pre-attached push-in wire connecters for fast and easy direct wiring.

Cold weather rated with a minimum cold start temperature of negative 20☏.

Sturdy die-cast aluminum construction and shatter-resistant lens with ball-and-socket design for easy head rotation so light can be directed where it is needed most.

The light automatically goes back to the motion-activated and dusk-to-dawn features the next day.

A manual override function is available to turn the fixture into a switch-controlled unit.

It can be set to off which changes the light to be a motion-activated light only.

The Area Light Mode control sets the length of time for low beam light from 3 hours, 5 hours, or Dusk to Dawn.

Security Light Mode control sets the length of time the high beam will remain on once motion is detected (1, 5, or up to 10 minutes) and the distance range from 5, 30, 60, or 100 feet max.

2-in-1 adjustment controls features 2 different settings of Low Beam Area Lighting at 25% brightness and High Beam Security Lighting at 100% brightness (3300 lumens) with option of manual override to switch control overnight.This 3-head security light has a 240-degree sensor that detects motion up to 100 feet in an outward direction as well as a 360-degree sensor that detects motion below when unit is mounted 14 feet from the ground.